جهاز جديد من alinco

اصدرت شركة النكو جهاز بمواصفات فنية عالية وله مجال واسع في الإستقبال يبداء من 0.1000 إلى 2,149.999950MHz PARTS & SERVICE
DEALERS


DJ-X2000
SPECIFICATIONS

DJ-X2000T (US model)
DJ-X2000TC (Canadian model/Authorized use in the US)

• Receiving Range: 0.1000 to 2,149.999950MHz (Cellular frequencies including image reception blocked on T version)
  
• Mode: NFM/WFM(mono,stereo)/AM/CW/USB/LSB
  
• Antenna imp.: 50 ohms
  
• Antenna terminal: BNC
  
• Supply voltage: DC 4.8V (Ni-Cd battery pack EBP-33,34,37N), DC 6V with EDH-16 AA battery case, DC 10-16V external power source.
  
• Typical operation with Alkaline AA in EDH-16: 30hours (1:4 battery saver ON)
  
• Current consumption: approx. 150mA in normal reception, approx. 50mA with 1:4 battery saver at 6Vdc power source
  
• Operating temperature: -10 to 60 C or 14 to 140 F
  
• Frequency stability: Within +/- 2.5 ppm at operating temperature range AF output: 100mW or more 10% THD
  
• Channel steps: Auto, 50, 100, 200, 500Hz, 1, 2, 5, 6.25,
  8.33, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, 150, 200, 250, 500KHz,
  user-programmable
  
• Memory channels: 2,000 / 50banks, 40channels in each bank
  
• Program-Scan: 20 pairs
  
• Priority watch memory: 1
  
• Dimension without projection: 57 x 150 x 27.5 mm
  
• Weight: 200g
  
• System: Triple-conv. Superheterodyne
  1st IF: 814.5MHz or 304.3MHz
  2nd IF: 45.05MHz
  3rd IF: 455KHz
  
• Typical sensitivity:
  FM/WFM 12dB SINAD, AM/SSB/CW 10dB S/N
  
  
  
  • AM:
    0.1 to 5.0 MHz: 1.5uV
    5.0 to 900MHz: 1.0uV
    
  • SSB/CW:
    0.1 to 5.0 MHz: 0.6uV
    5.0 to 900MHz: 0.5uV
    900MHz up: 1.0uV
    
  • NFM:
    5.0 to 900MHz: 0.5uV
    900MHz up: 2.0uV
    
  • WFM:
    5.0 to 900MHz: 2.0uV
    900MHz up: 4.0uV
    
  </li>
  

(An indication purposes only. The actual value may vary depending on where it is measured.)


ACCESSORIES

• EBP-33N 4.8V 650mA Ni-Cd pack (extra-small)
  
• EBP-37N 4.8V 700mA Ni-Cd pack (standard)
  
• EBP-34N 4.8V 1.2A Ni-Cd pack (long-life)
  
• EDC-88 multi-voltage switching quick charger
  
• EDH-16 Dry cell case
  
• EDC-36/EDC-16B Cigar-plug DC cable with filter
  
• EME-6 Earphone
  
• ESC-28 Soft-case for EBP-33N
  
• ESC-29 Soft-case for EBP-37N/EDH-16
  
• ESC-30 Soft-case for EBP-34N
  
• EBC-6 Mobile-bracket
  
• EDC-37 External DC power-supply cable
  

* Standard accessories may vary depending on the version. Please
contact your dealer for details.The US version comes with EBP37N,
EDC88,EBC3 belt-clip, a hand-strap, an antenna, an instruction manual
and a warranty certificate.

* Variety of battery-packs and accessories are also available from
after-market manufactures but use of Non-Genuine accessories may void
warranty. Do not use Alinco original charger to charge NI-MH battery
packs available from after-market battery manufactures.

Welcome to DJ-X2000 programming software download site.

Please be advised that this is a freeware (copy-right reserved by
Alinco, Inc). Although we have tested this software on our Windows
95/98/NT environments and experienced no fatal accident during the
operation, we are not responsible of any eventual damage caused to your
radio and/or PC system by using this utility. Sorry, please ask NO
questions regarding this software; up-dates will be posted here as soon
as it will be released. It is recommended that you remove the older
version before you install the latest one in case of update.

This software enables you to program frequencies and set parameters on
any version of DJ-X2000(US,Europe,Japan and Canada) and DJ-X20(Japanese
only). The 800MHz cellular band can't be modified by any means, and
inversion scrambler decoder feature is blocked for the "T" model
according to the U.S. legal requirements.. When you edit Japanese
language display mode, use HANKAKU KATAKANA only although it appears
that KANJI and HIRAGANA characters are also acceptable. NEVER USE KANJI
or HIRAGANA characters as it may result in unstable PC operation while
loading the edited data back to the radio.

<A href="ftp://ftp.alinco.co.jp/djx2000/setupx2k_1.3.2.exe">setupx2k_1.3.2.exe (4.47MB)

This version 1.3.2 (updated Dec, 2001) is improved with some changes:

• Added Tab menu for quick direct access to the various tabbed settings pages.
  
• Print modified to allow choice of which settings tabs to print from.
  
• Minor bugs fixed.
  

Please remember that you must have an ERW-4C computer interface
modem cable in order to connect the unit to your PC. A simple
connection cable may not work properly.

Alinco declines any and all responsibilities for damages this software
may cause to your PC hardware and/or software installed in it.